Skip to content
naulon
Not checkedNot checked for notices yet.

Aluminium in compacted graphite iron

Grzegorz Gumienny, Barbara Kurowska, Leszek Klimek

China Foundry · 2020

doi:10.1007/s41230-020-9013-x (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Compacted graphite was obtained using inmold technology. The effect of aluminium on the crystallization process, microstructure, ferrite microhardness, and hardness of compacted graphite iron was studied. The microscopic and diffraction tests were also performed, and the process of cast iron crystallization was also investigated. Results show that aluminium increases the temperature of the eutectic transformation as well as the transformation temperature in the solid state. It is found that aluminium is a graphite forming element in compacted graphite iron (CGI) at a concentration up to 2.4wt.%. When its concentration is higher than 3.1wt.%, aluminium causes the spheroidization of the carbides in eutectoid mixture. It is also demonstrated that in cast iron with an aluminium content higher than ~8wt.%, AlFe3C0.5 phase crystallizes from the liquid.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.