Boosting the Electrochemical Performance of Li- and Mn-Rich Cathodes by a Three-in-One Strategy
Wei He, Fangjun Ye, Jie Lin and 9 more
Nano-Micro Letters · 2021
doi:10.1007/s40820-021-00725-0 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Abstract There are plenty of issues need to be solved before the practical application of Li- and Mn-rich cathodes, including the detrimental voltage decay and mediocre rate capability, etc. Element doping can effectively solve the above problems, but cause the loss of capacity. The introduction of appropriate defects can compensate the capacity loss; however, it will lead to structural mismatch and stress accumulation. Herein, a three-in-one method that combines cation–polyanion co-doping, defect construction, and stress engineering is proposed. The co-doped Na+/SO4 2− can stabilize the layer framework and enhance the capacity and voltage stability. The induced defects would activate more reaction sites and promote the electrochemical performance. Meanwhile, the unique alternately distributed defect bands and crystal bands structure can alleviate the stress accumulation caused by changes of cell parameters upon cycling. Consequently, the modified sample retains a capacity of 273 mAh g−1 with a high-capacity retention of 94.1% after 100 cycles at 0.2 C, and 152 mAh g−1 after 1000 cycles at 2 C, the corresponding voltage attenuation is less than 0.907 mV per cycle.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.