Skip to content
naulon
Not checkedNot checked for notices yet.

In situ preparation of well-dispersed CuO nanocatalysts in heavy oil for catalytic aquathermolysis

Ming Chen, Chen Li, Guo-Rui Li and 2 more

Petroleum Science · 2019

doi:10.1007/s12182-019-0300-3 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract We developed an in situ synthesis strategy for preparing well-dispersed CuO nanoparticles as aquathermolysis catalyst for viscosity reduction in Shengli heavy oil (China). A Cu(OH)2-contained microemulsion was employed as a carrier to disperse the precursor Cu(OH)2 to the heavy oil phase. Under aquathermolysis condition (240 °C, 2.5 MPa of N2), the Cu(OH)2 precursors would first be converted in situ to well-crystallized and size-homogeneous CuO nanoparticles naturally, catalyzed by which the viscosity of Shengli heavy oil could be reduced as much as 94.6%; simultaneously, 22.4% of asphaltenes were converted to light components. The agglomeration of the in situ prepared monoclinic CuO nanoparticles could be negligible throughout the catalytic reaction. Based on the characterization results of 1H NMR, elemental analysis and GC–MS of oil samples before and after catalytic aquathermolysis, the mechanism for viscosity reduction of heavy oil in the catalytic system was investigated.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.