Experimental investigation of enhancement of carbon dioxide foam stability, pore plugging, and oil recovery in the presence of silica nanoparticles
Abdul Rahim Risal, Muhammad A. Manan, Nurudeen Yekeen and 3 more
Petroleum Science · 2018
doi:10.1007/s12182-018-0280-8 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Abstract The influence of surface-modified silica (SiO2) nanoparticles on the stability and pore plugging properties of foams in porous media was investigated in this study. The pore plugging ability of foams was estimated from the pressure drop induced during foam propagation in porous media. The results clearly showed that the modified SiO2 nanoparticle-stabilized foam exhibited high stability, and the differential pressure increased in porous media by as much as three times. The addition of SiO2 nanoparticles to the foaming dispersions further mitigated the adverse effect of oil toward the foam pore plugging ability. Consequently, the oil recovery increased in the presence of nanoparticles by approximately 15% during the enhanced oil recovery experiment. The study suggested that the addition of surface-modified silica nanoparticles to the surfactant solution could considerably improve the conventional foam stability and pore plugging performance in porous media.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.