Skip to content
naulon
Not checkedNot checked for notices yet.

Effects of pH on rheological characteristics and stability of petroleum coke water slurry

Fu-Yan Gao, Eric-J. Hu

Petroleum Science · 2016

doi:10.1007/s12182-016-0118-1 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract In this study, the effects of pH on slurrying properties of petroleum coke water slurry (PCWS) were investigated. The slurrying concentration, rheological characteristics and stability of PCWS were studied with four different types of additives at pH varying from 5 to 11. The results showed that the slurrying concentration, rheological characteristics and stability of PCWS all increased at first and then decreased with increasing pH from 5 to 11, and a pH of around 9 was found to be the most favorable acid–alkali environment to all these three slurrying properties. It was also indicated that only in a moderate alkaline environment can the additives be active enough to react with particle surfaces sufficiently to obtain good slurrying concentration and form a stable three-dimensional network structure, which can support strong pseudoplastic characteristics and good stability. An acid environment was a very unfavorable factor to the slurrying properties of PCWS.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.