Rotor‐integrated modeling of wind turbine aerodynamics

A novel approach for the modeling of rotor‐integrated aerodynamic loads is suggested to answer the need for a comprehensive, insightful, and analytical actuator disc model. All the six degrees of freedom (including tangential components) are considered. It is shown that loads may be written as a quadratic form of a reduced six‐component velocity vector at the hub. The individual contributions of lift and drag, azimuthal variations, as well as blade pitching and tip losses are isolated. Errors introduced by the necessary approximations are discussed, and parametric corrections are considered. Parameter identification methods are then suggested, and the performance of the resulting calibrated analytical models is assessed. Results show that the new modeling approach is able to accurately model both the mean values of the thrust and power coefficients and their derivatives with respect to tip‐speed ratio and pitch angle across the full range of operating wind speeds. Furthermore, it is able to reconstruct the general rotor behavior with a minimal amount of information available. Tangential components are also well modeled, although they require the knowledge of airfoil properties. The model's architecture leaves room for extensions to dynamic flow, skewed flow, and azimuthal load variations.

Abstract licence: CC BY-NC

20 more references, whose wording the paper’s licence keeps private.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.