Skip to content
naulon
Not checkedNot checked for notices yet.

Current status and key factors for coalbed methane development with multibranched horizontal wells in the southern Qinshui basin of China

Shida Chen, Dazhen Tang, Shu Tao and 2 more

Energy Science & Engineering · 2019

doi:10.1002/ese3.366 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract The Qinshui basin is the most successful area for coalbed methane (CBM) development in China. Since 2008, 45 multibranched horizontal wells (MBHWs) have been put into production in the Fanzhuang block, of which 10 wells have an average daily gas rate (DGR) of >10 000 m3/d. Well 4‐5 with the total gas production of 1.054 × 108 m3 achieved the China's highest DGR of 63 744 m3/d. Compared with vertical wells, MBHW is an effective way to develop CBM in low permeability reservoirs in China. However, there are still 23 wells have an average DGR of <3000 m3/d, of which 18 wells are below 1000 m3/d. The results show that shallow depth (<600 m), high gas content (>16 m3/t) and saturation (>80%), long coal seam interval (>3000 m), reasonable branch spread, and stable wellbore are the basis for achieving high production. The encountered faults connected to the aquifer will cause a high water production and an extremely low gas rate (<1000 m3/d). In the inclined coal seam, the up‐dip MBHW is more favorable for the formation water drainage and the pressure drop funnel expansion than the down‐dip MBHW, and the horizontal well should be drilled perpendicular to the high‐permeability direction to achieve a higher recovery ratio. MBHW is more sensitivity to drainage rate due to the coal fine migration in the horizontal segments, and the high pressure drop rate will lead to high frequency of stunk pump and eventually affect the gas production. Currently, the biggest challenge for CBM development with MBHW is wellbore stability. 57% of inefficient wells are caused by wellbore collapse during drilling and production processes. Here, a new type of “Roof Drilling‐Tree Shaped” horizontal well structure was presented in this work. The first “Roof Drilling‐Tree Shaped” horizontal well with a total length of 12 288 m and a coal seam interval of 9408 m was successfully applied without drilling accidents.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.